Rectangular Cross-Section
Trapezoid Cross-Section with Solid Rubber Edges
Dimensions
1 ß = 10° for solid rubber edges only
Grades
We are processing proven rubber mixtures of different formulations for different purposes. Our grades are defined as follows:
SR - standard
BR - oil and grease resistant
H - highly temperature resistant, up to 170° C, peaks up to 190° C
Shore hardness can be combinded with other properties. Our NP grades are temperature resistant up to 100 ° C.
Tractive Force
Standardly, our belts are equipped with reinforcement layers of polyester or of aramid. Normally we use polyester, for special requirements we switch to aramid. In some cases we have already processed steel-reinforcement on special request. Talk to us about your application.
Trapezoid Cross-Section with Solid Rubber Edges
Dimensions
|
Descirption
|
Sign
|
from - to
|
|
|---|---|---|---|
|
|
|
L - Profile
|
M - Profile
|
|
Length, measured on the inner side (running side)
|
L
|
1'200 mm – 22'000 mm
± 0,75% |
|
|
Width of belt
|
B
|
56,4 mm – 347,8 mm
± 1 mm |
56,4 mm – 347,8 mm
± 1 mm |
|
Heigth of belt
|
H
|
11,5 mm – 35 mm
± 0,15 mm |
|
|
Heigth of profile
|
h
|
2,5 / 5,0 mm
|
8,5 mm
|
|
Width of profile
|
b
|
4,7 mm
|
9,4 mm
|
|
Angle of edges1
|
ß
|
0° / 10°
|
|
|
Depth of central groove
|
S
|
0 - 15 mm
|
|
|
Opening angle
|
α
|
90° - 160°
|
|
Grades
We are processing proven rubber mixtures of different formulations for different purposes. Our grades are defined as follows:
|
Description
|
Properties
|
|---|---|
|
NP 450 BR
|
40° – 45° Shore A, abrasion resistant
|
|
NP 650 SR
|
60° - 65° Shore A, highly abrasion resistant
|
|
NP 700 SR
|
65° - 70° Shore A, highly abrasion resistant
|
|
NP 900 SR-H
|
85° - 90° Shore A, most abrasion resistant
|
SR - standard
BR - oil and grease resistant
H - highly temperature resistant, up to 170° C, peaks up to 190° C
Shore hardness can be combinded with other properties. Our NP grades are temperature resistant up to 100 ° C.
Tractive Force
Standardly, our belts are equipped with reinforcement layers of polyester or of aramid. Normally we use polyester, for special requirements we switch to aramid. In some cases we have already processed steel-reinforcement on special request. Talk to us about your application.
|
Description
|
Properties
|
|---|---|
|
SPR 2500
|
2500 N/cm
|
|
SPR 3500
|
3500 N/cm
|
|
SPR 4000
|
4000 N/cm
|